Name: ComNet CNMC2+1SFP 2-Channel 10/100/1000 Mbps Ethernet Electrical To Optical Media Converter
Brand: ComNet Communications
SKU: CNMC2+1SFP

ComNet CNMC2+1SFP 2-Channel 10/100/1000 Mbps Ethernet Electrical To Optical Media Converter

Brand: ComNet Communications

ADI #:CNMC2+1SFP Model #: CNMC2+1SFP Name: ComNet CNMC2+1SFP 2-Channel 10/100/1000 Mbps Ethernet Electrical To Optical Media Converter

Link Fault Pass-Through feature detects if either of the copper ports are down and triggers the optical port to switch states to indicate the failure to the head-end
Optical port supports 100/1000 Mbps full duplex data
Full size units feature a contact closure output for remote side link failure detection

Product Overview

General Information

The ComNet Ethernet CNMC2+1SFP electrical-to-optical Ethernet media converters accept two 10/100 or 1000Mbps electrical inputs and converts this to a single 100 or 1000Mbps optical output (selected by a DIP switch) and the 100/1000Mbps optical input back to the 10/100/1000 Mbps electrical output. "Auto-Negotiating" is supported on the copper interface side. These devices use either one or two optical fibers, depending upon the selection of sold-separately SFP (Small Form-Factor Pluggable Module; sold separately) optical module. The ComNet exclusive Demux feature allows for port isolation, replicating two media converters over one fiber. The ComNet exclusive Mux feature prevents network video flooding of multicast traffic with DIP switch selection of the fiber port as a dedicated uplink path. The CNMC2+1SFP series can be powered by wide range of AC or DC input power supplies.

Main Features

Link Fault Pass-Through feature detects if either of the copper ports are down and triggers the optical port to switch states to indicate the failure to the head-end
Optical port supports 100/1000 Mbps full duplex data
Full size units feature a contact closure output for remote side link failure detection
IEEE 802.3 Compliant
Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required
Voltage transient protection on all power and signal input/output lines provides protection from power surges and other voltage transient events
ComFit standard form factor is interchangeable between stand-alone or rack mount use
Uses customer-installed ComNet SFPs for compatibility with a wide range of optical fibers, optical connector types, and optical transmission distances (SFPs ordered separately)
Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput
Standard ComFit models are hot-swappable

Information

Category : Data Comm & Networking, Media Converters, Media Converters & Transceivers, Products

EAN Code : 5171593