content loaded
ADIUK
Home
Home
ADI a Resideo company
menu

C-TEC

Filter Results

Showing 37 - 47 of 496
content loaded
c-tec qt606 quantec, slave overdoor light
Sign in for your Pricing
c-tec ca456a-w cast c-3-8.5 base vad with 92db sounder, white
Sign in for your Pricing
c-tec bf451a-cx-sw compact c-3-8 ceiling vad with 91db sounder, compatible with en54-3-23-17, white
Sign in for your Pricing
c-tec qt608c quantec, corridor display with controls
Sign in for your Pricing
image of bf431a/cx/w
Sign in for your Pricing
c-tec nc806cs nurse call overdoor light with sounder
ADI#: NC806CS
Model#: NC806CS

Key Features

  • Provides audible and visual indication of 800 Series Alarm calls outside bedrooms, WCs and any other area fitted with an 800 Series calling device.
  • Indicates Standard calls via a constant tone/constant red light and Emergency calls via a pulsing tone/pulsing red light.
  • Dual red LEDs and triangular diffuser make it highly visible from a distance.
Sign in for your Pricing
Sign in for your Pricing
c-tec ncp-12 nurse call nylon pull cord kit, contains 3m cord and two triangles
ADI#: NCP-12
Model#: NCP-12

Key Features

  • A BS8300 compliant anti-bacterial wipe-clean pull cord pack suitable for use with C-TEC's Quantec and 800 Series ceiling pull units.
  • Contains 3m of red vinyl encapsulated cord, two triangular bangles and a red fixing bullet.
  • Cord has integral properties that can help prevent the spread of infections such as MRSA, e.coli, c.diff, S Aureus and the Norovirus.
Sign in for your Pricing
Sign in for your Pricing
c-tec qt606 quantec, slave overdoor light
ADI#: QT606
Model#: QT606

Key Features

  • Provides visual indication of calls made from a Quantec call point outside bedrooms, WCs, etc.
  • Flash and colour sequence changes/intensifies to reflect the urgency of the incoming call.
  • Dual red and green LEDs and triangular diffuser make it highly visible from a distance.
Sign in for your Pricing
Sign in for your Pricing
c-tec ca456a-w cast c-3-8.5 base vad with 92db sounder, white
ADI#: CA456A/W
Model#: CA456A/W

Key Features

  • 255 devices per loop.
  • Autonomous decision-making for faster response times.
  • Multiple type codes.
Sign in for your Pricing
Sign in for your Pricing
c-tec bf560-24 24v 1.5a switch-mode power supply unit, en54-4 certified, plastic box
ADI#: BF560-24
Model#: BF560-24

Key Features

  • Multiple indicators - supply present, general fault, fault type & aux. equipment fault.
  • Two selectable battery charge currents.
  • Battery fault impedance limits can be optimised to suit load current (helps extend battery life)
Sign in for your Pricing
Sign in for your Pricing
c-tec bf433c-cc-dr-65 activ ip55 hi-output w-2.75-9 wall vad with 100db(a) sounder
ADI#: BF433C/CC/DR/65
Model#: BF433C/CC/DR/65

Key Features

  • LPCB certified to EN54-3 (Sounders) and EN54-23 (VADs).
  • Provides'W-2.75-9' rated light distribution when wall mounted (min. 0.4 lux over a 2.75 x 9m cuboid area). Also rated as W-4-4 VAD.
  • Impressive 100dB(A) sound output at 1m.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
c-tec qt602ers quantec, addressable infrared call point with iconised label, sounder and remote socket, button reset
ADI#: QT602ERS
Model#: QT602ERS

Key Features

  • A programmable Quantec addressable call point c/w iconised label, infrared receiver, call follower sounder and remote jack socket.
  • Onboard infrared receiver accepts calls from compatible Quantec infrared transmitters.
  • Can make up to 7 levels of call - Standard, Ensuite, Help Required, Emergency, Attack, Presence & Attendance (dependent on configuration and ancillary devices used).
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
c-tec bf451a-cx-sw compact c-3-8 ceiling vad with 91db sounder, compatible with en54-3-23-17, white
ADI#: BF451A/CX/SW
Model#: BF451A/CX/SW

Key Features

  • Third-party certified to EN54-3 (Sounders), EN54-23 (VADs) and 17 (Isolators) by Intertek (pending)
  • Provides'C-3-8 light distribution when ceiling mounted (min 0.4 lux over a 3 x 8m cylindrical area)
  • Can also provide'W-2.4-3.5' light distribution when wall mounted (min. 0.4 lux over a 2.4 x 3.5m cuboid area)
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
c-tec qt608c quantec, corridor display with controls
ADI#: QT608C
Model#: QT608C

Key Features

  • A 16 character x 2 line display used to indicate incoming calls in corridors, staff rooms, nursing stations, etc.
  • Includes an onboard sounder and buttons to accept, scroll through and manually divert calls.
  • Shows call type, call location and (depending on the device used to make the call) the User ID or name of the person calling.
  • Highest priority calls are shown first with a message saying how many calls are waiting.
  • Flash and sounder rates intensify to reflect the urgency of incoming calls.
Sign in for your Pricing
Sign in for your Pricing
image of ecu-16
ADI#: ECU-16
Model#: ECU-16

Key Features

  • Allows operators to communicate with up to 16 disabled refuge or fire telephone outstations
  • Includes an attractive semi-recessed handset
  • Improved SigTEL networking capability allow systems of up to 224 lines to be created
Sign in for your Pricing
Sign in for your Pricing
image of bf431a/cx/w
ADI#: BF431A/CX/W
Model#: BF431A/CX/W

Key Features

  • Impressive 96dB(A) sound output at 1m
  • 550µA quiescent current
  • 5mA alarm current at 24V DC (Sounder on max)
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
image of cfp762
ADI#: CFP762
Model#: CFP762

Key Features

  • PCB mounts inside the CFP fire panel.
  • Reset relay is active during the panel’s reset cycle.
Sign in for your Pricing
Sign in for your Pricing
close button