Name: CALL POINT ADR/ABLE Waterproof Red
Brand: Apollo
SKU: 58100-950APO

Apollo 58100-950APO Discovery Addressable Manual Call Point for Outdoors - in Red

Brand: Apollo

ADI #:58100-950APO Model #: 58100-950APO Name: CALL POINT ADR/ABLE Waterproof Red

Suitable for weatherproof applications
EN 54-11 Certified
Reports an alarm in under 0.2 seconds

Apollo Manual Call Point For Outdoor - Red - Polycarbonate

Product Overview

General Information

Marketing Information

Suitable for weatherproof applications
EN 54-11 Certified
Reports an alarm in under 0.2 seconds
'Plug and Play' terminal connections for faster wiring
Continuity link for wiring test before commissioning
XP95 & Discovery compatible

Electrical Considerations

The Discovery Waterproof Manual Call Point is loop powered and operates at 17-28V DC.

Operating Principles

The address of each call point is set at the commissioning stage by means of a seven-segment DIL switch. A single bi-coloured alarm LED is provided on the call point. This LED is controlled independently of the call point, by the control panel. The LED is illuminated red when the call point has been activated. The LED is illuminated amber/yellow LED to indicate a short circuit. This Manual Call Point helps reduce installation time as all the initial installation cabling is wired to a terminal block which fits neatly in the back of the call point. Once activated, the Discovery Waterproof Manual Call Point can be reset by inserting the test key into the bottom of the unit until the key clicks into position. Remove the test key and push the front cover up until it clicks home. The isolated version of the Discovery Waterproof Manual Call Point incorporates a short circuit isolator which will ensure its operation in the event of a short circuit fault on the loop. Full details of the isolator can be found in the PIN Sheet PP2090, available on request.

Mechanical Construction

The component parts of the call points are moulded in polycarbonate or ABS, depending on their function.

Backward Compatibility

The Discovery Waterproof Manual Call Point will operate only with control equipment using the Apollo Discovery digital protocol.

Product Information

The Waterproof Manual Call Point has been designed for use outdoors and in places where moisture can occur. A seven-segment DIL switch enables addressing of each call point at commissioning stage. When operated, the Manual Call Point interrupts the polling cycle for a fast response. Bi-coloured LEDs indicate isolate and normal conditions.

Key Features

IP 67 rated
'Plug and play' terminal connections for fast wiring
Continuity link for wiring test before commissioning
Reports an alarm in under 0.2 seconds
Resettable element

Information

Category : Addressable Systems, Fire & Gas Detection, Products, Waterproof Call Points

UPC Code :