Patient Stations
Filter Results
More Ways to Shop
Showing 1 - 12 of 49
content loaded
Sign in for your Pricing
ADI#: L753Model#: L753
Sign in for your Pricing
ADI#: QT302RXRSModel#: QT302RXRS
Sign in for your Pricing
ADI#: NC802DBModel#: NC802DB
Sign in for your Pricing
ADI#: QT422RXModel#: QT422RX
Sign in for your Pricing
ADI#: L752Model#: L752 ©
Sign in for your Pricing
ADI#: NC809DBBTModel#: NC809DBBT
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT608C/SSModel#: QT608C/SS
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC944/SSModel#: NC944/SS
Sign in for your Pricing
Key Features
- A programmable Quantec addressable call point c/w iconised label, infrared receiver, call follower sounder and remote jack socket.
- Onboard infrared receiver accepts calls from compatible Quantec infrared transmitters.
- Can make up to 7 levels of call - Standard, Ensuite, Help Required, Emergency, Attack, Presence & Attendance (dependent on configuration and ancillary devices used).
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: L753Model#: L753
Key Features
- Hands free two-way intercom - The resident does not have to press any buttons once the alert has been raised, staff control the direction of the speech, allowing the resident to speak freely, reassured they have spoken to someone and help is on the way.
- 7 levels of call - Call alerts are automatically prioritised to inform staff to attend residents or patients. These events are also available in a non speech version.
- Page facility - Staff can make global announcements to all other staff displays and call points that are in staff present mode
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT302RXRSModel#: QT302RXRS
Key Features
- An unobtrusive white round slave infrared receiver.
- Connects to a master Quantec infrared receiving device to increase IR coverage.
- Designed to accept infrared calls from compatible Quantec staff attack transmitters, patient neck/wrist pendants and staff attendance pendants.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
Key Features
- Allows up to two QT638 PIR movement sensors to be connected to a Quantec addressable call system.
- Connects to the slave input on a QT602 or QT609 Range Call Point.
- Typically located outside a bedroom where, for example, two PIRs are being used to monitor a patient getting out of bed.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC802DBModel#: NC802DB
Key Features
- An attractively designed button-operated call/reset point capable of generating Standard calls on an 800 Series Call System.
- Includes a 6.35mm jack plug socket for the connection of an optional tail call lead, pressure mat or other ancillary caling device.
- Red reassurance LED confirms a call has been made.
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT422RXModel#: QT422RX
Key Features
- Designed for use with Quantec's QT412 & QT432 range of infrared/radio transmitters and pendants.
- Operates at radio frequency (RF) 868.3 MHz
- Allows standard, help required, emergency and/or attack calls to be generated from external areas such as car parks, loading bays, etc.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: L752Model#: L752 ©
Key Features
- Hands Free Two-Way Intercom
- Call alerts are automatically prioritized to inform staff to attend to residents or patients. These events are also available in a non-speech version
- Staff can make global announcements to all other staff displays and call points that are in staff present mode
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC809DBBTModel#: NC809DBBT
Key Features
- A remote reset point c/w sounder specifically designed for use in Accessible Toilet Alarm systems.
- Allows calls generated by an NC807C ceiling pull unit to be cancelled at source, i.e. inside the WC.
- On-board reassurance LED and sounder provide audible and visual indication of an acknowledged call to reassure users that help is on the way (calls are acknowledged/accepted at an NC943B Single Zone Call Controller or an NC910/20 Range 10 to 20 Zone Call Controller).
Sign in for your Pricing
Sign in for your Pricing
Key Features
- Programmable Call Levels - Multiple alert levels
- Addressable - Assigned its own text address to display on the system
- Reassurance LED - Built in reassurance LED giving the user an immediate visual indication that help is on the way
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: QT608C/SSModel#: QT608C/SS
Key Features
- Highest priority calls are shown first with a message saying how many calls are waiting
- Flash and sounder rates intensify to reflect the urgency of incoming calls
- Adjustable contrast and volume controls
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
Key Features
- Designed to trigger a call by sensing the pressure change when a patient exits a bed.
- Connects to Quantec via the remote jack socket on a QT637 Enuresis/General Purpose Interface Socket or QT636 Interface Unit.
- To reduce the risk of nuisance calls, the QT637 includes circuitry that prevents a momentary change in pressure such as a patient quickly changing position from triggering a call.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing
ADI#: NC944/SSModel#: NC944/SS
Key Features
- An attractively-designed four zone call controller c/w mute and reset buttons.
- Fully compatible with C-TEC's entire range of 800 Series Call System components.
- Capable of indicating standard (constant tone) and emergency (intermittent tone) calls.
PRODUCT IS NON-RETURNABLE
Sign in for your Pricing
Sign in for your Pricing